当前位置:  技术问答>linux和unix

跪求大神 centos7下 vsftp 连接不上..........

    来源: 互联网  发布时间:2017-05-30

    本文导语:  公司新上linux服务器 要做ftp用  今天在我在虚拟机里装了centos7想学习一下  目前的情况就是 vsftp启动正常 21端口正常  [root@localhost ~]# netstat -tunlp |grep ftp tcp        0      0 0.0.0.0:21              ...

公司新上linux服务器 要做ftp用  今天在我在虚拟机里装了centos7想学习一下 

目前的情况就是 vsftp启动正常

21端口正常 
[root@localhost ~]# netstat -tunlp |grep ftp
tcp        0      0 0.0.0.0:21              0.0.0.0:*               LISTEN      2789/vsftpd  

iptables关闭,SELinux关闭

主机-虚拟机互相ping通 (我一直是用主机的ssh连接虚拟机操作)

但是主机的 cmd, 资源管理器,flashfxp 均连接不上 (提示连接超时)

实在没办法..前来请求大神指点一下 或者还能从哪里去找问题?
(我暂时想的是先匿名连接可以正常访问后 在学习下一步的添加ftp用户,可现在连接都连不上就卡到这里了....)

附上我的vsftpd.conf  (都是默认设置,我改的是下面部分)




# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=YES
#
# Uncomment this to allow local users to log in.
# When SELinux is enforcing check for SE bool ftp_home_dir
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
# When SELinux is enforcing check for SE bool allow_ftpd_anon_write, allow_ftpd_full_access
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/xferlog
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
# the user does not have write access to the top level directory within the
# chroot)
#chroot_local_user=YES
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd/chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
ls_recurse_enable=YES
#
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES
#
# This directive enables listening on IPv6 sockets. By default, listening
# on the IPv6 "any" address (::) will accept connections from both IPv6
# and IPv4 clients. It is not necessary to listen on *both* IPv4 and IPv6
# sockets. If you want that (perhaps because you want to listen on specific
# addresses) then you must run two copies of vsftpd with two configuration
# files.
# Make sure, that one of the listen options is commented !!
#listen_ipv6=YES

pam_service_name=vsftpd
#userlist_enable=YES
userlist_deny=NO


|
haven't played with centos 7 too much.

But you may want to telent first and see if telent can reach tcp/21

I guess you can't.

iptables has been retired in centos7, the new firewall tool is firewalld.

If I were your IT manager, I would pick centos 6...7 is too new...

    
 
 
 
本站(WWW.)旨在分享和传播互联网科技相关的资讯和技术,将尽最大努力为读者提供更好的信息聚合和浏览方式。
本站(WWW.)站内文章除注明原创外,均为转载、整理或搜集自网络。欢迎任何形式的转载,转载请注明出处。












  • 相关文章推荐
  • 大神们好! yum install gcc出现错误,请大神指点!
  • 求助~~哪位大神晓得如何固定tuxedo客户端与通信端的端口呀?
  • 请教各位大神 linux安装的步骤!
  • [FreeBSD] 大神,求解,control socket : can‘t to any socket
  • 一个很简单的liunx的问题。。。希望大神给个指点
  • 我的D盘不见了。。求大神。。。
  • 用U盘装红帽9,怎么装 ?求大神!!!!
  • ubuntu kde,神奇的输入法问题,求解,求大神显灵
  • 求大神赐教 关于brctl
  • NOSQL iis7站长之家
  • 大神们帮我看看这个死机的原因
  • 急!跪求大神赐教。fedora16 grub文件丢失
  • 求助 crontab -l & crontab -e 报错,谢各位大神先~~
  • 菜鸟求大神指导?
  • Java做Web开发,想学习下Linux,不知用什么版本的好,望各位大神们指点
  • 求大神详细讲解下KDbg的使用方法
  • linux装载刚编译2.6.38.8内核,错误了, 那个大神帮帮小白
  • 求各位大神给一个 进程 自启动脚本
  • 在VMware中安装Fedora中出现错误mount:special device /dev/hda does not exist,求大神解决
  • 关于postfix的问题,求大神进来看下


  • 站内导航:


    特别声明:169IT网站部分信息来自互联网,如果侵犯您的权利,请及时告知,本站将立即删除!

    ©2012-2021,,E-mail:www_#163.com(请将#改为@)

    浙ICP备11055608号-3